Panel Door Manufacturer in India
A good wooden door should stay strong, fit properly, and open smoothly even after years of use. At Maa Santoshi Furniture Industries Pvt. Ltd., we manufacture wooden panel doors in Anjar, Kutch, Gujarat. Every door is made in-house, starting from properly seasoned wood to the final finishing.
- No outsourced components, No third-party finishing,
- What leaves our factory is what gets installed.
We are a registered Panel Door Manufacturer in India, supplying residential builders, commercial contractors, interior designers, and export buyers across India and to Nepal, UAE, Oman, and West Africa. If you’ve been looking for a Manufacturer who builds panel doors, then you are at the right place.
What Is a Panel Door?
Many people think a panel door is just a wooden door with some design work on it, but the actual construction is different. A real panel door is made with a strong outer frame and separate panels fixed inside it. Because of this structure, the door handles moisture and weather changes better and is less likely to bend, crack, or get stuck after regular use.
Panel doors have been used for many years because they are strong, durable, and long-lasting. Even today, a properly made teak or sal wood panel door usually performs much better over time compared to low-quality hollow doors. While cheaper doors may start showing problems after some time, a good wooden panel door continues to look and work properly for years.
Our panel doors are made of teak, sal wood, and pine. The choice of wood, panel count, depth of panel reveal, and finish depends on the application. A bedroom door and a main entry door have different requirements, and we manufacture for both without treating them the same.
Our Panel Door Range
Our range covers the full spread of residential and commercial requirements from the simplest 2-panel layout to fully CNC-detailed configurations for premium properties.
2-Panel Doors
Two horizontal panels, clean vertical profile. A 2-panel door works because it's simple, solid in build, neat in appearance, and appropriately priced for applications where the door is functional more than decorative. These type of doors are widely preferred for bedrooms, bathrooms, utility rooms, service corridors, where they are opened and closed a hundred times a week.
4-Panel Doors
Many customers choose 4-panel doors because they have a simple design that looks good in almost every type of home. The top and bottom panel pattern gives the door a nice finished look without making it look too decorative. It works well in modern homes as well as more traditional interiors. These doors are commonly used in flats, houses, villas, hotels, and similar places. We make 4-panel wooden doors in teak, sal wood, and pine. Different finish options like polish, PU coating, or raw finish are available, so customers can choose what matches their interiors and budget best.
6-Panel Doors
More panels mean more visual structure, more shadow lines, more depth in the surface, more presence when you stand in front of it. Six-panel doors work as a main entrance doors for apartments and individual homes, as study room doors where you want a degree of visual weight, or in any space where the door is a design decision rather than a background element. We supply six-panel wooden doors in teak primarily. They carry polish well, and the grain on a good piece of teak combined with the light and shadow play of six panels is genuinely difficult to replicate with any alternative material.
Raised Panel Doors
When you look at a standard panel door, the panel usually sits flat with the frame or slightly inside it. A raised panel door looks different because the centre part of the panel comes out a bit more than the edges. This small detail gives the door a more classic and decorative appearance. You’ll often notice this style in traditional homes and interiors that use a rich wooden look. Our raised panel doors are produced in teak. The profile is machined in-house on our CNC setup, which gives us the consistency that hand routing cannot. They are available in single and double shutter formats, with multiple finish options.
Panel Doors with CNC Detailing
This is where the panel door format meets our CNC manufacturing capability. We run precision machined carving on select panel configurations, border motifs, floral inserts, and geometric grid patterns are added neatly on the door surface and outer wooden frame sections. The main structure of the panel door remains unchanged, the CNC detail gives it a surface character that a plain panel cannot achieve. Buyers who want a fancy wooden door look without the cost of a fully carved shutter tend to specify this range. It gives you the aesthetic of a carved wooden door at a panel door price point. Architects working on premium residential projects with mid-range budgets find this option particularly useful.
Pine Wood Panel Doors
Our pine door range brings the panel door format to a lighter, more cost-effective wood. Imported pine machines cleanly, accepts paint and laminate well, and produces a door that is significantly lighter than a teak equivalent, which matters for upper floor installation on large residential projects. We are one of the few Pine Door Manufacturers in Gujarat with in-house CNC finishing capability, which means our pine panel doors come off the same production line as our teak range, with the same dimensional accuracy and the same quality checks applied at each stage.
Elegant Quality, Responsible Choice
The unique & innovative Solid Panel Doors are symbol of traditional designs & modern innovations. The pleasant style & design create wonderful experience which uplift the aura of any space.
Based on unique innovative solutions, our doors are designed to enhance your lifestyle. Our Doors are factory made with perfect dimensional accuracy & finish. Thus eliminating any hassles of running around & dealing with multiple vendors such as carpenters, painters etc.
Wood Options and What Each One Is Good For
The choice of wood for a panel door matters more than most buyers realise when they’re making the initial decision.
Teak Wood
The premium option for a reason. Natural oils make teak highly resistant to moisture, termites, and weathering. It accepts all finishes well and improves in appearance with age and proper care. We use teak for main entry panel doors, raised panel doors, and any application where the door is exposed to weather or heavy use.
Sal Wood
Sal wood holds up to daily use, takes carving and profiling cleanly, and is widely regarded as one of the most durable construction timbers available in India. It is our standard recommendation for interior panel doors in residential and commercial projects where teak is over budget.
Pine Wood
Lightweight, stable in controlled indoor environments, and significantly more cost-effective than teak and sal wood. Our pine wood panel doors are ideal for apartment complexes, commercial interiors, and project builders who need consistent quality across many units at a managed cost.
Specifications at a Glance
- Panel configurations: 2-panel, 4-panel, 6-panel, raised panel, and custom layouts
- Wood: Teak, Sal wood, Pine (imported)
- Finishes: Natural polish, PU coat, lacquer, teak oil, paint-grade, or raw
- Sizes: Standard residential and commercial sizes, fully custom dimensions on request
- Treatment: Termite-proofed and moisture sealed as standard
- Frames: Matching wooden door frames in teak and sal wood available as a set
- Certification: ISO 9001 and ISO 14001 certified production process
Why Builders and Architects Specify MSFIPL Panel Doors
Panel Door Manufacturers are operating at every price point in India. What distinguishes a Manufacturer you come back to from one you tried once is usually not the product catalogue, it’s the execution. Here’s what consistently drives repeat orders to our facility:
1. Everything Made In-House
We do not outsource any part of our production. The wood processing, panel machining, CNC carving, sanding, and polishing all happen under one roof in our Anjar plant. That means when you order 200 doors for a housing project, the quality of the last unit shipped is the same as the first. There are no job-work suppliers whose standards vary between batches.
2. Dimensional Accuracy That Saves Time on Site
A door that’s out of specification by even a few millimetres creates installation problems the frame doesn’t fit, the door binds, and the gap is uneven. Our ISO 9001 certified process means the measurements you specify are the measurements you receive. Contractors who work with us regularly know they can take delivery and go straight to installation without measuring every unit first.
3. Panel Doors with Matching Frames
Sourcing the shutter from one Manufacturer and the frame from another creates tolerance problems that only show up on-site. We manufacture matching wooden door frames in teak and sal wood. Same plant, same dimensional standard, same wood type. You deal with one supplier and avoid the fitting issues that come with mixed sourcing.
4. Supply Across India and Internationally
We are active Panel Door Manufacturers in India, supplying to cities including Mumbai, Delhi, Bangalore, Chennai, Kolkata, Jaipur, Chandigarh, Lucknow, Faridabad, and Puducherry. Our plant’s proximity to Kandla port also means we are well-positioned for export. We supply wooden doors in Gujarat and beyond, including regular export shipments to Nepal, UAE, Oman, and West Africa.
5. Both Custom and Standard Orders Handled
Whether you’re a homeowner who needs one door for a bedroom renovation or a builder placing a 500 unit order for a housing complex, the same production standards apply.
We accept single-unit custom orders and large project batches with the same level of attention and quality control. Project orders are scheduled with fixed production timelines so you’re not guessing when your delivery will arrive.
Who We Supply Panel Doors To
Our wooden panel door range serves a broad customer base, and understanding who we work with helps clarify whether MSFIPL is the right fit for your requirement:
- Residential builders and developers –4-panel and 6-panel teak doors for premium housing projects, pine panel doors for apartment complexes and mid-range residential.
- Architects and interior designers –Raised panel and CNC-detailed panel doors for heritage, colonial, and premium contemporary projects. Custom sizing and finish matching available.
- Contractors and procurement managers –Bulk supply of standard panel configurations with consistent quality across large project quantities. Fixed lead times and export-capable packing.
- Timber dealers and distributors –Trade pricing available for dealers in India and abroad. We supply to wooden doors in Bangalore, wooden doors in Mumbai, wooden doors in Delhi, and major markets across India.
Export buyers (Nepal, UAE, West Africa) –Export treated and packed panel doors with full documentation. Our Wooden Door Manufacturer in Nepal and Gulf market experience means we understand destination specific requirements.
Frequently Asked Questions
1. Can I get a panel door with CNC carving on the panels?
Yes, CNC carving on panel surfaces and frame sections border motifs, floral inserts, geometric patterns, or custom artwork is done in our own facility.
2. Do you manufacture pine wood panel doors?
Yes, our pine wood panel doors are manufactured and finished entirely in-house. Pine panel doors are a practical choice for projects where teak is over budget but you still need a properly built, dimensionally accurate door.
3. Do you supply wooden door frames with the panel doors?
Yes, we do supply wooden door frames in teak and sal wood. You can order the complete set shutter plus frame from us directly.
4. Are your panel doors termite-treated?
Yes, All panel doors are termite-treated and moisture sealed as standard before dispatch.
5. Can I order a panel door in a non-standard size?
Yes, Non-standard opening sizes, oversized main entry doors, and architect specified dimensions are all available.